[VWR]

Thank you.
I ask to all of you; I’ve just updated the rcd330, but now the sound is so different: bass is very low. It seems like low power to the speakers. Have you ever heard it before? Also after a complete reset. Thanks a lot

I add some other informations: in my Yeti after the last upgrade I don't hear completely the two rear speakers (original speakers that are in rear doors: basses are low because only front tweeters are working). I tried to downgrade back to version 161108_6.5.5.1 (C180 BT) than I re-tried to upgrade to last version 166108_7.1.1.2 (C210 BT) In both cases there is the same problem. I tried also to unplug the fakra cable. No solution.

After the upgrade I have a RCD330 who plays like a walkman. Someone has a solution? Thanks a lot.

Do you have any diagnostic cable & soft like OBD11/VCDS/ODIS/VCP ?

[plipoblipo]

Thank you.
I ask to all of you; I’ve just updated the rcd330, but now the sound is so different: bass is very low. It seems like low power to the speakers. Have you ever heard it before? Also after a complete reset. Thanks a lot

I add some other informations: in my Yeti after the last upgrade I don't hear completely the two rear speakers (original speakers that are in rear doors: basses are low because only front tweeters are working). I tried to downgrade back to version 161108_6.5.5.1 (C180 BT) than I re-tried to upgrade to last version 166108_7.1.1.2 (C210 BT) In both cases there is the same problem. I tried also to unplug the fakra cable. No solution.

After the upgrade I have a RCD330 who plays like a walkman. Someone has a solution? Thanks a lot.

Do you have any diagnostic cable & soft like OBD11/VCDS/ODIS/VCP ?

No, I don’t have it. do you suggest something of then? Thanks

[VWR]

Thank you.
I ask to all of you; I’ve just updated the rcd330, but now the sound is so different: bass is very low. It seems like low power to the speakers. Have you ever heard it before? Also after a complete reset. Thanks a lot

I add some other informations: in my Yeti after the last upgrade I don't hear completely the two rear speakers (original speakers that are in rear doors: basses are low because only front tweeters are working). I tried to downgrade back to version 161108_6.5.5.1 (C180 BT) than I re-tried to upgrade to last version 166108_7.1.1.2 (C210 BT) In both cases there is the same problem. I tried also to unplug the fakra cable. No solution.

After the upgrade I have a RCD330 who plays like a walkman. Someone has a solution? Thanks a lot.

Do you have any diagnostic cable & soft like OBD11/VCDS/ODIS/VCP ?

No, I don’t have it. do you suggest something of then? Thanks

Your radio maybe coded as 2 speaker output mode.. You can check it with diagnostic cable.

[plipoblipo]

I tried another radio (of a friend), same problem. It's a problem of coding. I'm trying to learn something (this is the same problem: 

[To see links please register here]

)

[Kalti1203]

Is this working with my headunit?

[VWR]

Hi No,

If you want Green color (Just lines) & Skoda boot logo firmware, I can do it for you. You need to pay €15.

Ersin

[Kalti1203]

Hi No,

If you want Green color (Just lines) & Skoda boot logo firmware, I can do it for you. You need to pay €15.

Ersin

Sounds good. Can you tell me about the advantages of this firmware compared to mine old version?

[VWR]

Hi No,

If you want Green color (Just lines) & Skoda boot logo firmware, I can do it for you. You need to pay €15.

Ersin

Sounds good. Can you tell me about the advantages of this firmware compared to mine old version?

It is an updated version from factory.
I do not know the major advantages of firmware.

[Kalti1203]

Hi No,

If you want Green color (Just lines) & Skoda boot logo firmware, I can do it for you. You need to pay €15.

Ersin

Sounds good. Can you tell me about the advantages of this firmware compared to mine old version?

It is an updated version from factory.
I do not know the major advantages of firmware.

Ok. Can you also insert german language? Pls tell me the PayPal Email.

---

I already made the payment of 15 Euros (d**.k****@googlemail.com).

[VWR]

Hello,
Sorry I can not insert German.
I will send link in the evening.