Login

Bushfella · (This post was last modified: 07-09-2021, 03:51 AM by Bushfella.)

Hey VWR,

I have 2011 Mk6 gti,

I have installed rcd330 187g noname, I have MFSW currently functioning correctly with the headunit (and would like to keep this function). I however have battery drain issue.

Gateway details as follows:

J533 Gateway
Protocol: KWP2000
Software: 7NO907530H
Software Version: 1620
Hardware Number: 1K0907951
Hardware Version: H42

Is there any solution for this drain issue?
Do I need an adaptor?
If I need adaptor how do I retain the MFSW functionality?
If I do not require an adaptor, is there a way I can add wiring to correct the battery drain?

Let me know if you need any further information.

Cheers,

Frikkie

Below I have attached picture of gateway scan and the original headunit for the car.

[To see links please register here]

Hey VWR,

I have 2011 Mk6 gti,

I have installed rcd330 187g noname, I have MFSW currently functioning correctly with the headunit (and would like to keep this function). I however have battery drain issue.

Gateway details as follows:

J533 Gateway
Protocol: KWP2000
Software: 7NO907530H
Software Version: 1620
Hardware Number: 1K0907951
Hardware Version: H42

Is there any solution for this drain issue?
Do I need an adaptor?
If I need adaptor how do I retain the MFSW functionality?
If I do not require an adaptor, is there a way I can add wiring to correct the battery drain?

Let me know if you need any further information.

Cheers,

Frikkie

Below I have attached picture of gateway scan and the original headunit for the car.

[To see links please register here]

armiaxk · 15-09-2021, 08:21 PM

Would someone mind sharing the pictures for the quad lock pin out and the light and pin out and which wires i need to tap into.

***VWR*** · 21-09-2021, 12:17 PM

(15-09-2021, 08:21 PM)armiaxk Wrote:
[To see links please register here]
Would someone mind sharing the pictures for the quad lock pin out and the light and pin out and which wires i need to tap into.

[To see links please register here]

Please check the 1st post..

Daevasj9 · (This post was last modified: 27-09-2021, 11:59 AM by Daevasj9.)

Hi All, I Have recently fit a Noname RCD330 187B into my VW Polo Match Edition 2014 and have a couple of issues which i'm hoping someone could help with - i believe the issue may be caused by an incorrect Canbus connector that was supplied with the radio.

I am experiencing a few issues that all seem to happen intermittently:
1. The radio doesn't always turn off and on with the car
2. When the car is put into reverse, the radio only sometimes shows the reverse sensor
3. The steering wheel buttons only sometimes work

I have seen some above posts regarding different adaptors however could someone please tell me the correct one i need or please send a link to somewhere i could purchase it in the UK

Is this enough information or would photos help?
Thanks,

The exact model i purchased is below

[To see links please register here]

Will the below resolve my issue?

[To see links please register here]

***VWR*** · 27-09-2021, 12:58 PM

(27-09-2021, 11:47 AM)Daevasj9 Wrote:
[To see links please register here]
Hi All, I Have recently fit a Noname RCD330 187B into my VW Polo Match Edition 2014 and have a couple of issues which i'm hoping someone could help with - i believe the issue may be caused by an incorrect Canbus connector that was supplied with the radio.

I am experiencing a few issues that all seem to happen intermittently:
1. The radio doesn't always turn off and on with the car
2. When the car is put into reverse, the radio only sometimes shows the reverse sensor
3. The steering wheel buttons only sometimes work

I have seen some above posts regarding different adaptors however could someone please tell me the correct one i need or please send a link to somewhere i could purchase it in the UK

Is this enough information or would photos help?
Thanks,

The exact model i purchased is below

[To see links please register here]

Will the below resolve my issue?

[To see links please register here]

Hello,

Could you please send photo of your original radio?
Could you please send System Information of new radio (Setup/System Information) ?

VWR

Daevasj9 · (This post was last modified: 29-09-2021, 08:59 AM by Daevasj9.)

Thanks for your reply - please see below pictures. Whats weird to me is that once the car has been running for a few mins the steering buttons and rear camera sensor begins to work fine however when it first is turned on it doesn't.

Thanks again

[To see links please register here]

***VWR*** · 29-09-2021, 10:42 AM

Ok it seems new radio is defective.
It should work on your car perfectly..

Daevasj9 · 29-09-2021, 11:45 AM

Thanks for your help - i think your correct that its either the radio that is defective of the adaptor that came with the radio is not appropriate or defective.

I have attached pics below.

I will contact the seller

Thanks again,

[To see links please register here]

***VWR*** · 30-09-2021, 06:34 AM

Maybe adapter is defective,
You may check CAN pins on both side of adapter..

VWR

Login
Username:
Password:	Lost Password?
	Remember me