04-17-2019, 02:01 AM
(This post was last modified: 05-25-2019, 03:34 PM by alexmoncadacolmedarez.)
The following blog post will cover how to install one of our OEM backup camera kits into your vehicle. Adding a backup camera to your stock stereo adds another level of luxury, safety and added convenience to your vehicle.
VOLKSWAGEN OEM REAR VIEW CAMERA KITS
These backup cameras are OEM and use stock wiring and connectors. These will also only fit Volkswagens using the following Stereos:
Our kits compose of the cameras themselves, stock 26 pin connector with wiring, and leads for 12V+ power, ground and trigger connections. Some additional tools will be needed to complete the install, such as wire taps (to connect leads), a 12V Fuse Tap to gain 12V+ power, trim removal tools, and
VOLKSWAGEN OEM REAR VIEW CAMERA KITS
These backup cameras are OEM and use stock wiring and connectors. These will also only fit Volkswagens using the following Stereos:
- RNS510 Navigation System
- RNS315 Navigation System
- RCD510 Touchscreen System (ONLY F and H revision units)
Our kits compose of the cameras themselves, stock 26 pin connector with wiring, and leads for 12V+ power, ground and trigger connections. Some additional tools will be needed to complete the install, such as wire taps (to connect leads), a 12V Fuse Tap to gain 12V+ power, trim removal tools, and
[To see links please register here]
.- OEM VW Trunklid Mounted Kit- Fits on 2011-2015 Volkswagen Jetta (
[To see links please register here]
MK6), 2007-2015 Volkswagen Tiguan, 2010-2015 Volkswagen Tiguan
- Trunk Handle Mounted Camera Kit DIY
- Trunk Handle Mounted Camera Kit DIY
