[Casper2b]

Hi,

I bought You are not allowed to view links. Register or Login to view. and You are not allowed to view links. Register or Login to view.. If I'm not wrong it's a Dessay 187B and I will receive it next week

On my 2010 VW Polo 6R I already have the 4K OPS working on my RCD510. 

My question is: What should I do to make the OPS and the rear camera working together and being able to switch from OPS to the camera?

[ErsinCakir]

Hello,
First install rcd330 and try reverse gear, see if camera and ops working.
If they are not working, you should make coding via vcds/vag can pro/odis.
Proper coding should be Btye 0 Bit 3 for Ops, Byte 3 Bit 6 for Camera..
Receive it and give it a try, then write again please.

[Casper2b]

Ok I'll write when I'll receive my HU

I have one last question: is the OPS pluged at the same place where I'm supposed to plug the camera?

Or should I transfer the pin of the yellow cable to the corresponding pin on the existing plug?

[ErsinCakir]

Yellow cable is for rear camera. You should not do any wiring for Ops, Ops is transferred via Can Bus cables which is alrealdy installed on your Radio's socket.

[Casper2b]

Oh ok I was asking because I saw in a video that we need to connect the blue plug in the quadlock instead of the original blue plug.

What is connected in the original blue plug?