Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Accessing the Setup Menu on RNS 510
#1
Accessing the Setup Menu on RNS 510 head units with firmware version 2660 / 2662 / 2664 / 2666 / 2668

Firmware versions 2660 / 2662 / 2664 / 2666 / 2668 access to the Setup/Test Menu.



Option 1 – Vagcom/VCDS access



Using Vagcom/VCDS open Channel 37 – Navigation, go into adaption and change channel 50 to 1 (will be 0).



To enter the test/setup mode when the RNS 510 is operating press and hold the setup button, keep holding it when the radio menu appears and shortly after the test menu appears . I had to reboot my unit after coding it but it may be possible a power cycle is enough.



Option 2 – Edit the firmware image (not sure if this allows one off access or permanent access at this stage????)



To enable this edit a file on the firmware DVD before updating.



WA\EURPQTO.WSH for Volkswagen or

WA\EURSKHDD.WSH for Skoda


Find these lines



# Testmode: NOT active

SetRegDataHex(0x21,"00",0x0,0x1,0x1)


And replace with



# Testmode: NOT active

SetRegDataHex(0x21,"01",0x0,0x1,0x1)


Check the file length after editing otherwise the firmware update will fail.


To enter the test/setup mode when the RNS 510 is operating press and hold the setup button, keep holding it when the radio menu appears and shortly after the test menu appears . I had to reboot my unit after coding it but it may be possible a power cycle is enough.
Arrow   You are not allowed to view links. Register or Login to view.  Blush
Reply
 


Forum Jump:


Users browsing this thread: 1 Guest(s)

About Volkswagen Rcd330 Plus Head Unit Guide , Firmware Update