[G@kturks]

Oem Volkswagen Camera insallation Guide 

[Jonfive]

Oem Volkswagen Camera insallation Guide 

Same procedure for the 330?

Mine came with the camera coding done already

[G@kturks]

Oem Volkswagen Camera insallation Guide 

Same procedure for the 330?

Mine came with the camera coding done already

Yes Almost same Just you need delay box if your camera not oem..
Look at this topic.

You are not allowed to view links.

[To see links please register here]

or

[To see links please register here]

to view.

[dopeytree]

Ok can anyone help? I have the camera all wired up properly but when adding power it never shows anything on the screen.

Before adding any power it would select the reverse screen (black screen) then say rear camera not available.

Its all activated in VCDS.

The only other thing I can think of is maybe it needs a delay box? But I would have still expected a picture to show up.
Or otherwise maybe it needs a NSTC camera?

Any Ideas?

[Zipfi]

Maybe i have a solution to get the oem camera running. long story short:  you need to connect the wire comming from the camera, wich is a straight coax, to the cinch coming from the deck.
The wire from the camera is connected to the camera module, where it is changed to the 26 pin connector going up to the deck.

the wire plugged into the module has a fakra connector. so, what you need is a fakra to male cinch (rca) adapter. unplug fakra wire from the module (mostly located over your clutch pedal), plug adapter into the cable and connect with the deck. Have fun!