Volkswagen Rcd330 Plus Head Unit Guide , Firmware Update
Rcd330 Camera installation Guide - Printable Version

+- Volkswagen Rcd330 Plus Head Unit Guide , Firmware Update (http://rcd330plus.com)
+-- Forum: Rcd 330 PLus Guide (http://rcd330plus.com/forumdisplay.php?fid=1)
+--- Forum: RCD330 Plus camera installation guide (http://rcd330plus.com/forumdisplay.php?fid=10)
+--- Thread: Rcd330 Camera installation Guide (/showthread.php?tid=13)

Pages: 1 2 3 4 5 6 7 8


Rcd330 Camera installation Guide - G@kturks - 01-07-2018

Rcd330 Camera installation Guide

Reversing light : positive + ( Blue ) / Negatif - ( brown ) 

[Image: camcab.jpg]

Vcds Camera Active

[Image: camvcd.jpg]

ACC POWER 

[Image: fuse2.png]

[Image: fuse.jpg]


———————————————————-


RE: Rcd330 Camera installation Guide - eddy - 01-31-2018

I've connected everything as shown, the camera is enabled in VCDS but when i switch to Reverse it only shows the OPS (sensors) and never the camera. What to do?


RE: Rcd330 Camera installation Guide - G@kturks - 01-31-2018

(01-31-2018, 07:13 PM)eddy Wrote: You are not allowed to view links. Register or Login to view.I've connected everything as shown, the camera is enabled in VCDS but when i switch to Reverse it only shows the OPS (sensors) and never the camera. What to do?

You sure camera code is active ?


RE: Rcd330 Camera installation Guide - eddy - 01-31-2018

(01-31-2018, 09:21 PM)Gokturks Wrote: You are not allowed to view links. Register or Login to view.
(01-31-2018, 07:13 PM)eddy Wrote: You are not allowed to view links. Register or Login to view.I've connected everything as shown, the camera is enabled in VCDS but when i switch to Reverse it only shows the OPS (sensors) and never the camera. What to do?

You sure camera code is active ?

Yes, it is Bit 6 (40), and it can display "Rear view camera is not available" when camera is unplugged. When i plug the camera it doesn't show the error but only the OPS


RE: Rcd330 Camera installation Guide - G@kturks - 01-31-2018

(01-31-2018, 10:12 PM)eddy Wrote: You are not allowed to view links. Register or Login to view.
(01-31-2018, 09:21 PM)Gokturks Wrote: You are not allowed to view links. Register or Login to view.
(01-31-2018, 07:13 PM)eddy Wrote: You are not allowed to view links. Register or Login to view.I've connected everything as shown, the camera is enabled in VCDS but when i switch to Reverse it only shows the OPS (sensors) and never the camera. What to do?

You sure camera code is active ?

Yes, it is Bit 6 (40), and it can display "Rear view camera is not available" when camera is unplugged. When i plug the camera it doesn't show the error but only the OPS

You are not allowed to view links. Register or Login to view.
look here or check blue socket  back to radio you connect good place or not
look here pls


RE: Rcd330 Camera installation Guide - Lanc3lot - 02-26-2018

Hello
Is the "delay box" still necessary when installing a backup camera to a RCD330G Plus (Noname 187B 1GB RAM)?
Thanks


RE: Rcd330 Camera installation Guide - Nov - 02-26-2018

Yes if your camera is not OEM it is necessary


RE: Rcd330 Camera installation Guide - Lanc3lot - 02-26-2018

(02-26-2018, 08:57 AM)Nov Wrote: You are not allowed to view links. Register or Login to view.Yes if your camera is not OEM it is necessary

Indeed I was looking after Non-OEM cameras

Thanks


RE: Rcd330 Camera installation Guide - Lanc3lot - 02-26-2018

What type is the fuse used for the ACC? How many A?
Thanks


RE: Rcd330 Camera installation Guide - G@kturks - 02-26-2018

(02-26-2018, 05:44 PM)Lanc3lot Wrote: You are not allowed to view links. Register or Login to view.What type is the fuse used for the ACC? How many A?
Thanks

10